I have a question regarding the Excel Dump done from the software. I cannot find the time stamp in it or the sample time. Also, when I change the Real Time Recorder value in Ksamples/per seconds. I suppose, I cannot see any change in the generated Excel File. Is there a relation between the time stamp (or sample time) in the Excel File and the Time Base chosen?

 

In the software, there are three commands to save data as excel file:

1:Save|Save as Txt: Here is saving current waveform/data displayed on the current screen. We can save the data at the auto/normal/single mode or the hold mode. The saved file only records the date and time while we execute the command.

Data From DSO2300
Date 2007-5-7
Time 11:25:32
Unit V
A B
0.600 0.200
0.600 0.000

 

2.Tools|Real Time Record As Txt: The information of the start time and the sampling rate is saved at the header of the saved file.

 

Data From DSO2300
Start Date 2007-5-7
Start Time 11:36:08
Unit V
Sampling Rate 25 KS/S
A B
0.600 0.000
 
3.Tools|Low speed Real Time Record As Txt: In this command, the stamp is saved.