SBC2440-IV Single Board Computer
- Samsung's S3C2440A, Operating frequency 400MHz @1.33V
- Supporting image manipulation project based 31-Series USB camera of Vimicro
- Supporting three kinds of GUIs, they are QT, Mizi, OpieGUI
- System parameters can be saved in regedit, and the residual Flash can be read and written
- Display your Logo during system startup
- The system can be updated through USB port
- Supporting Linux 2.6 and WinCE 5.0
 |
 |
Features
|
|
| Items |
Description |
| Dimensions |
65mm x 45mm |
| Processor |
Samsung S3C2440, Operating frequency 400MHz @1.33V |
| Memory |
64MB SDRAM, 64MB NandFlash |
| Expansion Connector |
24-bit address signal, 16bit data signal, Chip Select signal, GPIO, Read and Write signals are all available through the expansion connector
Two 2.0mm pitch 2*42-pin board to board connectors |
MotherBoard
(Interfaces described in blue indicate the differences from SBC2440-III) |
| Interfaces |
Description |
| Ethernet |
10/100Mbps, RJ45 port |
| TFT-LCD |
support resolution up to 1024 x 768/16-bit, DF9-41S-1V (hirose) |
| Touch ADC |
Four-channel 10-bit ADC |
| USB port |
One host and one device port or two host ports |
| Serial port |
One five-wire RS232 serial port, two three-wire RS232 serial ports |
| Audio |
Audio input and output slots |
| RTC |
with a backup battery |
| JTAG |
20-pin Jtag interface |
| LEDs |
Four programmable leds |
| Buttons |
Six programmable buttons |
| SD card |
One standard SD card slot |
| IrDA |
on-board module |
| Camera |
8-bit signal, FPC connector, 0.5mm pitch |
| Expansion Connector |
2*20-pin GPIO expansion connector (J18) |
OS
|
Windows CE 5.0(BSP), Eboot (all in source code) |
| Linux 2.6, uboot, Yaffs file-system (all in source code) |
Software |
| OS |
Item |
Feature |
Description |
| Linux2.6 |
u-boot
(Do not provide
source code) |
Boot |
Start up system |
| Tftp |
Support tftp transmitting protocol |
| File system |
Support writting yaffs file system image into nand flash |
| Kernel |
Support writting kernel image into nand flash |
| Kernel Parameter |
Support kernel parameter setting |
| Etc. |
Others |
| Kernel |
Version |
Linux kernel 2.6.13 |
| File system |
ROM/CRAM/EXT2/FAT32/NFS/YAFFS |
| Serial device |
Three serial ports (Provide source code) |
| 10/100M Ethernet |
DM9000 (Provide source code) |
| RTC |
(Provide source code) |
| USB Host |
(Provide source code) |
| LEDs |
(Provide source code) |
| Buttons |
User buttons (Provide source code) |
| Language |
Multi-language Support |
| LCD |
Support 240x320, 640x480, 480x272, 800x480 (Provide source code) |
| Touch panel |
(Provide source code) |
| SD/MMC card |
(Provide source code) |
| Sound |
UDA1341(Provide source code) |
| Embedded GUI |
Qt/Embedded |
(Provide source code) |
| Mizi |
Provide burn image only |
| opie |
Provide burn image only |
Network protocol
& application |
TCP/IP |
TCP/IP protocol |
| File transfer |
(FTP Client/server) |
| Remote login |
Telnet protocol |
| Web server |
boa web server |
Wince
5.0 |
Bootloader |
stepldr |
Copy Eboot to SDRAM to jump to Eboot |
| Eboot |
Ethernet bootloader for wince, support downloading image through USB device port |
| Driver |
Serial device |
Three serial ports (Provide source code) |
| 10M/100M Ethernet |
DM9000 (Provide source code) |
| USB OHCI |
(Provide source code) |
| USB Device |
(Provide source code) |
| RTC |
(Provide source code) |
| Buttons |
User buttons (Provide source code) |
| LCD |
(Provide source code) |
| Audio |
UDA1341 (Provide source code) |
| SD/MMC card |
(Provide source code) |
Relative Documentation and Links
 SBC2440-IV board overview
Samsung S3C2440A datasheet 4.3 inch TFT-LCD display module datasheet (LTE430WQ-F0C)
7 inch TFT-LCD display module datasheet (LTP700WV-F01)
Order Information
| Order No. |
MH9 |
| Item |
Embest SBC2440-IV Single Board Computer |
| Hardware |
SBC2440-IV Board (without TFT-LCD module) |
| Price |
US $216
(Discount price is available for SBC quantity order) |
| Others |
• One A/B type USB cable
• One RS232 serial cable
• One cross Ethernet cable
• One Embest EasyICE JTAG cable
• One 5V Power adapter
• CD-ROM (inlcuding Linux2.6/WinCE5.0 BSP, tools, user manual) |
| Optional Hardware |
• 4.3-inch TFT-LCD display module (Optional)
• 7-inch TFT-LCD display module (Optional) |
| Order online |
Buy Now  |
| P.O |
Print the order form, complete and fax to us. Also fax your T/T receipt. We will deal with your order once we receive your orderform and T/T receipt.
 Order form in pdf  Order form in MS word |
|
Home
