The ATMEL SAM9G45 Board produced by Embest is a full-featured evaluation board based on the ATMEL' new processor – AT91SAM9G45 which runs at up to 400MHz, with 128 Mbytes DDR2 memory and 256 Mbytes SLC NAND Flash. The board provides a wide range of peripherals, including a high-speed USB host/device port, an Ethernet 10/100 interface, two high-speed SD/MMC slots and a QVGA 320x240 LCD panel with Resistive touch screen. In addition, the board supports Linux, WinCE and Android OS and offers plenty of example applications under these three OS, makes engineers easy to develop their project based on this AT91SAM9G45 processor.
Power: 5VDC from connector, with back-up battery on board
Working temperature: -10 to 70 Deg C
Dimension: 120 x 90 mm
Software Features
There are plenty of software examples provided for you to test and debug this ATMEL SAM9G45 ARM9 board, all in source code. These software examples (as follows) can be debugged under the popular Keil MDK (Microcontroller Development Kit) environments and help with your design and development.
NO.
Example Programs
1
WinCE6.0 OS Mapping, and the FirstBoot and Eboot set up from NandFlash
2
Linux2.6.30 source code and mapping, and the UBoot set up from NandFlash
3
Audio output test program
4
NandFlash read/write test program
5
NorFlash read/write test program
6
DDR2 SDRAM read/write test program
7
DataFlash read/write test program
8
EEPROM read/write test program
9
RTT Realtime timer test program
10
RTC Realtime timer test program
11
TWI Test program
12
DMA transfer test program
13
DBGU Serial interface communication test program
14
Ethernet test program
15
USB test program
16
Micro SD Card Read/Write test program
17
SD/MMC Card Read/Write test program
WinCE6.0 Software Resource
WinCE6.0 BSP Software Resource
Category
Function
Description
Bootloader
FirstBoot
Use to boot Eboot, provide source code and FIRSTBOOT.nb0 image
Eboot
Provide source code and Eboot.nb0 image Eboot’ function include: 1.Ethernet download: Set Mac address, static IP or dynamic IP through DHCP, and you can download WinCE kernel through Ethernet download 2.Format NandFlash 3.Set boot delay time 4.Set WinCE image address in NandFlash, and run address of the RAM, and image’s size
Driver programs
Display
LCD driver, ★ provide source code
EEPROM
EEPROM memory driver, ★ provide source code
EMACB
Ethernet driver, ★ provide source code
I2C
I2C driver ★ provide source code
KeyPad
Button driver, support external matrix keyboard, ★ provide source code
NandFlash
NandFlash driver, ★ provide source code
SDHC
Micro SD driver, ★ provide source code
Serial
Serial port driver, ★ provide source code
Touchscreen
Touchscreen driver, ★ provide source code
USB Host
USB Host driver, support EHCI and OHCI modes, ★ provide source code
WAVEDEV
Audio driver, support WM8731, use I2C to transfer command, and use TWI to transfer data, ★ provide source code
Application
The application WinCE brings
The functions which are included in WinCE: 1.Touchscreen calibration 2.Internet Explorer 3.Windows Media Player, support mp3, WMV files 4.Picture viewer, support the format of bmp, gif, jpg, png files 5.Internal input keyboard
The synchronization software in PC
Microsoft Activesync
This software is used to communicate between PC and WinCE. After build synchronization, you can transfer data from device to PC, or from PC to device through USB line. And you can also do remote debug using this software
The download tools in PC
HyperTerminal
Serial port debug tool
SAM-BA1.13+USB
SAM-BA download Eboot and Wince image to the NandFlash of the board through USB line
Linux2.6.30 Software Resource
Linux2.6.30 Software Resource
Category
Function
Description
Bootloader
AT91Bootstrap
Use to boot Uboot, ★ provide source code
Uboot
Version: UBoot1.3.4
Function: 1.Support to erase, read and write NandFlash 2.Support to download images through Ethernet 3.Support to set and save environment parameters 4.Support to display or modify the memory data 5.Support to set bootm and bootargs ★ provide source code
Kernel and device driver
Kernel
Kernel version: Linux-2.6.30
System clock
System master frequency: 400MHz
Display
Support many kinds of the LCD size, can set resolution ratio ★ provide source code
Touchscreen
Touchscreen driver, ★ provide source code
DM9000
DM9000 Ethernet driver, ★ provide source code
HSMMC
SD/MMC/SDIO driver, ★ provide source code
IIC
I2C driver, ★ provide source code
SPI
SPI driver, ★ provide source code
NANDFLASH
NandFlash driver, ★ provide source code
SERIAL
Serial port driver ★ provide source code
WAVEDEV
Audio driver, support AC97, the default driver is IIS (WM8731) ★ provide source code
USB Host
USB Host driver, support USB keyboard, mouse, flash disk and so on ★ provide source code
DMA
DMA driver, ★ provide source code
GPIO
LED and button driver, ★ provide source code
File system
Jffs2 file system
Support jffs2 file system
Cross-compiler
arm-none-linux-gnueabi
Cross tool chain, ★ provide source code
GUI
angstrom
The functions of the GUI: 1. View picture 2.MPlayer, support to play mp3, wmv, avi 3.Calendar, Clock, Calculator日历、时钟、计算器 4.File manager 5.Terminal 6.Serveral games 7.Touchscreen calibration program
The download tools in PC
HyperTerminal
Serial port debug tool
SAM-BA1.13+USB
SAM-BA download Bootloader and Wince image to the NandFlash of the board through USB line
Application
Industrial and building control
HVAC
POS terminals
Alarm systems
Printers
Medical Appliances
There are plenty of documentations and materials in the CD-ROM of this ATMEL SAM9G45 ARM9 Board, such as user’s manual, datasheets, software, example programs, and so on. If you need these materials, please feel free to contact us.
Related documentations
Documentations
Size
Download
ATMEL AT91SAM9G45 Datasheet
1.15MB
ATMEL SAM9G45 ARM9 Board User Manual
1.18MB
ATMEL SAM9G45 ARM9 Board Schematic
281KB
Linux User Manual for SAM9G45 Board
229KB
WinCE User Manual for SAM9G45 Board
2.14MB
AT91SAM 32-bit ARM-based Microcontrollers
Atmel's AT91SAM 32-bit ARM Flash MCUs and Embedded MPUs are designed for system control, wired & wireless connectivity, user interface management, low power and ease of use. They have received wide acceptance in markets like POS terminals, security, building automation, industrial control, medical, white goods, PC and gaming peripherals, toys and cellular phone accessories. A comprehensive and high-quality eco-system provides access to development tools, Flash programming, software and worldwide technical support.
Atmel has a proven track record as a market leading ARM MCU and MPU vendor, a developer of high bandwidth architectures, an innovator of low power microcontrollers and a facilitator of software portability.
The broadest software compatible ARM MCU & Embedded MPU portfolio
Optimal peripheral mix, memory footprint, low power and performance
Only supplier with 200+ MIPS 32-bit Flash MCU (SAM9XE)
Highest SRAM integration (SAM7X512, SAM9261)
Lowest power standby modes on 32-bit MCU (SAM7L)
Tightly integrated development suites and software packages
Software reuse between different members of the family
Highest bandwidth architectures allowing selection of lower cost MCU range
Local commercial and technical experts
ATMEL AT91SAM9G45 Microcontroller
The ARM926EJ-S based AT91SAM9G45 features the frequently demanded combination of user interface functionality and high data rate connectivity, including LCD Controller, resistive touchscreen, camera interface, audio, Ethernet 10/100 and high speed USB and SDIO. With the processor running at 400MHz and multiple 100+ Mbps data rate peripherals, the AT91SAM9G45 has the performance and bandwidth to the network or local storage media to provide an adequate user experience.
The AT91SAM9G45 supports the latest generation of DDR2 and NAND Flash memory interfaces for program and data storage. An internal 133 MHz multi-layer bus architecture associated with 37 DMA channels, a dual external bus interface and distributed memory including a 64-Kbyte SRAM which can be configured as a tightly coupled memory (TCM) sustains the high bandwidth required by the processor and the high speed peripherals.
The I/Os support 1.8V or 3.3V operation, which are independently configurable for the memory interface and peripheral I/Os. This feature completely eliminates the need for any external level shifters. In addition it supports 0.8 ball pitch package for low cost PCB manufacturing.
The AT91SAM9G45 power management controller features efficient clock gating and a battery backup section minimizing power consumption in active and standby modes.
PACKING LIST
NO
NAME / TYPE
QTY
DESCRIPTION
1
ATMEL SAM9G45 ARM9 Board
1
Target board; CPU: AT91SAM9G45
2
IDC10 Cable
1
10-10pins, 10cm, gap:2.00mm
3
Mini USB Cable
1
To supply power to the board or for downloading programs and debug
4
10/100 Ethernet Cable
1
Connect to the network
5
DB9-IDC10 Cable
1
DB9(F) to IDC(10 pins) calbe
6
20Pins-10Pins JTAG Converter
1
Connect with 20pins or 10pins JTAG Debug Cables
7
TFT LCD Panel
1
4.3 inches QVGA 480x272 LCD panel with resistive touch screen
8
Power Adapter
1
12V, 1.25A, supply power to the board
Total weight of each standard package (lb.): 1.5 lb.
OPTIONAL
#
NAME / TYPE
QTY
DESCRIPTION
1
CDROM of ATMEL SAM9G45 ARM9 Board
1
01-Documents -- user manual, data sheets and the other development documents.
02-Images -- image files for this product.
03-Software -- software programs for this product.
04-Tools -- the utilities tools and software
Home 
Products Class
