"
Embest Flash Programmer
Order#: EFPA
Embest Flash Programmer is used for flash chip programming in the embedded system developing based on ARM series processors, especially good for programming surface mounted flash chip. Embest Flash Programmer can be released as a powerful tool for Embest IDE for ARM package or an individual tool for customers used for programming flash chip. This software must be applied together with ARM emulator made by Embest or a JTAG cable made by yourself. When purchasing this tool individually, you should buy an Embest JTAG Emulator (PowerICE or UNetICE ) or make a JTAG cable by yourself. We have offered detailed document on how to make a JTAG cable by yourself.
Features
Supports all ARM7 and ARM9 microcontrollers Supports programming almost all the manufacturers' flash chips. Customer can add new flash chips into the software easily by himself Also supports on-chip flash programming for LPC2000 series, AT91SAM7 series, STR710F series Capable of blank checking, erasing, programming, file verifying, calculating check sum, protection, uploading codes Capable of designated sector operation without influencing other sector Access flash chip data width of 8-bit, 16-bit and 32-bit Capable of 1-chip, 2-chip and 4-chip Flash Programming without splitting codes file Available for Windows98 / NT / 2000 / ME/ XP host.
Programming On-chip Flash for LPC2000 series, AT91SAM7 series, STR710F series
Embest Flash Programmer supports programming on-chip flashes and external flash chips of the LPC2000 families, AT91SAM7 families and STR71x families via JTAG interface.
LPC2000 families include LPC2100 series and LPC2200 series, total 17 microcontrollers till Jan. 2005. Most of these microcontrollers have on-chip flash. Some of these microcontrollers cannot add external flash chip. We summarize it here: With on-chip flash: Most of the LPC2000 families except LPC2210 and LPC2290. Capable of adding external flash chip: LPC2210, LPC2290, LPC2212, LPC2214, LPC2292, LPC2294. AT91SAM families include AT91SAM7AX series and AT91SAM7SXX series; so far have totally 7 microcontroller members. Most of these microcontrollers have on-chip flash. Some of these microcontrollers can not add external flash chip. We summarize it here: With on-chip flash: AT91SAM7S32/64/128/256, AT91SAM7A3. Capable of adding external flash chip: AT91SAM7A1/A2. The STR71x series is a family of microcontrollers with different memory sizes, packages and peripherals. All of these microcontrollers have on-chip flash.
Make JTAG Cable by Yourself (JTAG Cable Schematic)
One end of JTAG Cable is a DB25 header used for connecting the parallel port of computer and the other end is a 20-pin (or 14-pin) IDC header used for connecting the user's circuit board. The following two figures form a complete JTAG Cable circuit diagram. The diagram only shows 20-pin IDC wiring method.
There are plenty of documentations and materials in the CD-ROM of this starter kit, such as user's manual, datasheets, software, example programs, and so on. If you need these materials, please feel free to contact us .
Devices supported by Flash Programmer
The Flash devices currently supported by this Embest Flash Programmer are listed below. (If you are going to use a flash device which is not supported, you can add the flash device by yourself. The help document of this flash programmer will tell you the details information on how to add a flash device by yourself)
Advanced Micro Devices Micron 1. MT28F002B1-BSiliconStorageTechnology
Atmel Fujitsu ST
Intel Toshiba Winbond Macronix NXP Spansion SyncMOSTechnology Samsung
ORDER INFORMATION
Order# Descriptions 1 Please contact us for higher volumes
EFPA
Embest Flash Programmer $
140
View Cart >>
Home 
Products Class
