Home   Products   Service   Support   Download   Contact Us   Shipping Cost   About Us   Forum SAMICC.COM
 
Web site search:
 
ID:  Pass:  Register
 
       
Products Class
Evaluation Boards
ATMEL ARM Boards
NXP ARM Boards
ST ARM Boards
Samsung ARM Boards
Freescale ARM Boards
Development Tools
JTAG Emulator for ARM
DSP Emulators / Adapters
Module Products
Module Boards
Conversion Module
Extension Boards
Software Tools
Embest IDE
Flash Programmer
Register Editor
Accessories
   Evaluation Boards > NXP ARM Boards

NXP LPC2478 ARM7S Board  
Order#: P2478     Delivery Wt:2.5 lb     
EM-LPC2478 is a powerfull evaluation board based NXP LPC2478 ARM7S Processor. The NXP LPC2478 processor working at the maximum frequency at 72MHZ,and features internal 98KB SRAM,512KB flash,LCD controller,Ethernet,USB and external memory controller etc, is very applicable in industrial,communication,car,medical treatment fields.
   This LPC2478 evaluation board have a plenty of interfaces for full evaluate and utilize the NXP LPC2478 ARM7 processor.
NXP LPC2478 ARM7S Board
Price: $265 Shopping Cart
IN STOCK +   ACCEPT OEM/ODM...
   
    Hardware Specification:
    Hardware Specification Description
    Processor NXP ARM7TDMI-S LPC2478 Processor
    Memory Internal Memory:512KB SPI flash
                   98KB SRAM
    External Memory:16MB NAND FLASH
                    32MB SDRAM
                    4MB NOR FLASH
                    1MB SRAM
    Debug 20-pin JTAG Debug interface  
    Cortex Debug+ETM Debug interface (Not soldered)
    ARM 10-pin (Not soldered)
    Storage One SD card interface
    Serial One USB to Serial interface                                                              
    Two UART interfaces and one of them can be used as modem interface  
    USB Two USB Host interfaces                                                                  
    Two USB Device interfaces 
    CAN Two CAN interfaces
    Audio Two I2S audio input interfaces
    Two I2S audio output interfaces
    ADC One ADC adjustable potentiometer
    Net One 10/100M Ethernet interface
    Expansion 64-pin I/O user expansion interface
    Keys Four user button
    One reset button
    Power Supply Support USB2UART mini USB/USB1/USB2/EXT 5V
     
    These properties enable the board special superiority in the fields of industrial control, medical systems,protocol converters,communications etc.And we provide a wealth of examples and resources for each element of the board which helps you get started to the project development and personal learning.
     
    Software Specification:
    Example Description
    01 GPIO Horse Race Light (GPIO) Test
    02 EXTINT External interrupt controller Test
    03_TIMER TIMER Test
    04_UART Output information via UART
    05_ADC ADC Sampling Test
    06_DMA DMA Test
    07_RTC RTC Test
    08_PWM PWM Test
    09_SDRAM SDRAM Test
    10_NANDFLASH NANDFLASH Test
    11_SRAM SRAM Test
    12_Nor flash Nor flash Test
    13_EEPROM EEPROM Test
    14_WDT Test WDT function
    15_LCD Display pictures circulate via LCD
    16_LCD_Touch LCD Test
    17_SSP_Touch LCD Test
    18_Easy Web Web Port Test
    19_USB_Mass Storage USB map to moving storage
    20_USB_HID USB_HID Test
    21_CAN CAN Test
    22_MCI SD card Test
    23_IIS Audio IIS Audio Test
    24_Uc GUI Display GUI
    Related documentations
    Documentations Size Download
    NXP LPC2478 Eval Board User Manual 1.68 MB
    NXP LPC2478 Eval Board Schematic 247 KB
    NXP LPC2478 Datasheet 2.01 MB
    General description

    The LPC2478 microcontroller incorporates an LCD controller, a 10/100 Ethernet Media
    Access Controller (MAC), a USB full-speed Device/Host/OTG Controller with 4 kB of
    endpoint RAM, four UART, two Controller Area Network (CAN) channels, an SPI
    interface, two Synchronous Serial Ports (SSP), three I2C interfaces, and an I2S interface.
    Supporting this collection of serial communications interfaces are the following feature
    components; an on-chip 4 MHz internal oscillator, 98 kB of total RAM consisting of 64 kB
    of local SRAM, 16 kB SRAM for Ethernet, 16 kB SRAM for general purpose DMA, 2 kB of
    battery powered SRAM, and an External Memory Controller (EMC). These features make
    this device optimally suited for portable electronics and Point-of-Sale (POS) applications.
    Complementing the many serial communication controllers, versatile clocking capabilities,
    and memory features are various 32-bit timers, a 10-bit ADC, 10-bit DAC, two PWM units,
    and up to 160 fast GPIO lines. The LPC2478 connects 64 of the GPIO pins to the
    hardware based Vector Interrupt Controller (VIC) that means these external inputs can
    generate edge-triggered interrupts. All of these features make the LPC2478 device
    particularly suitable for industrial control and medical systems.

     
    Complement
    Please refer to LPC2478_Datasheet.pdf if you want to learn more about this microcontroller.
    PACKING LIST
    NO NAME / TYPE QTY  DESCRIPTION
    1 NXP EM-LPC2478 (P2478) 1 Evaluation board with 4.3' TFT LCD Screen
    2 Mini USB Cable 1 To supply pow to the board or for downloading programs and debug.
    3 10/100M Ethernet Cable 1 Connect to the network
    4 Serial Cable 1  Connect to the COM port to Host PC,9-pin male to 9-pin female,no longer than 10ft/3m,wired one-to-one
     Total weight of each standard package (lb.): 1.5 lb.
     
    OPTIONAL
    # NAME / TYPE QTY   DESCRIPTION
    1 CDROM of NXP LPC2478 ARM7 board(For free) 1   01-Documents -- user manual, data sheet and the other development document.
      02-Images -- image files for this product.
      03-Software -- software program for this product.
      04-Tools -- the utilities tools and software.
    CDROM
     
    ORDER INFORMATION
    Order# Descriptions Unit Price Remarks
    P2478 NXP LPC1768 ARM-M3 Board $270 Add CartAdd to cart Please contact us for higher volumes
     
    View Cart >> 
   Relevant Products
NXP LPC2378 ARM7S Board NXP LPC2378 ARM...
NXP LPC2368 ARM7S Board NXP LPC2368 ARM...
NXP LPC1766 ARM Cortex-M3 Board NXP LPC1766 ARM...
  Statement | Product Note Copyright © 2000-2011 Embest All rights reserved.
Tower B 4/F, Shanshui Building, Nanshan Yungu Innovation Industry Park, Liuxian Ave. No. 1183, Taoyuan St., Nanshan District, Shenzhen, China(518055)
BEFORE PLACING ORDERS TO US PLEASE READ, UNDERSTAND AND AGREE TO THE TERMS AND CONDITIONS AS INCLUDED.