Products |
|
| STM32F107 ARM-CM3 Board |
|
Order#: STMC
Delivery Wt:1.5lb
IN STOCK
|
| The Embest STM32F107 ARM Cortex-M3 board is used the STMicroelectronic's ARM Cortex-M3 core based STM32F107VC microcontroller, working at up to 72MHz frequency, with 256KB Flash and 64KB RAM internal memory. The board features a 2.4 inch TFT LCD Panel (320*240) with touch screen, as well as a wide rang of peripherals: mini USB supporting USB OTG , 10/100Mb Ethernet, Micro SD Card, TFT-LCD, ADC, DAC, SPI, IIC, RS232 (DB9), two CAN, speaker, earphone, five-position Joystick, Reset buttons, etc. In...... |
|
|
|
|
| NXP LPC1300 ARM-CM3 Board |
|
Order#: P130
Delivery Wt:1.5lb
IN STOCK
|
| The NXP LPC1300 ARM-CM3 Board is a brand new, cost-effective but high-performance evaluation tool of the ARM Cortex-M3 based LPC1300 controller family from NXP, allowing you to create and test working programs for this advanced architecture.
The board has a wide range of interfaces making it a great starting point for your next Cortex-M3 project. |
|
|
|
|
| NXP LPC1768 ARM-CM3 Board |
|
Order#: P768
Delivery Wt:1.5 lb
IN STOCK
|
| The LPC1768 evaluation board is based on ARM Cortex-M3 processor from NXP, its operating frequency is up to 100MHz, with 512KB high-speed on-Chip Flash Memory and 64KB RAM, together with a colour QVGA LCD, Ethernet, USB, CAN, SD/MMC card interface, and UARTs. |
|
|
|
|
| ATMEL SAM9G45 ARM9 Board |
|
Order#: A9G4
Delivery Wt:1.5lb
Lead Time[4 weeks]
|
| The ATMEL SAM9G45 Board produced by Embest is a full-featured evaluation board based on the ATMEL' new processor – AT91SAM9G45 which runs at up to 400MHz, with 128 Mbytes DDR2 memory and 256 Mbytes SLC NAND Flash. The board provides a wide range of peripherals, including a high-speed USB host/device port, an Ethernet 10/100 interface, two high-speed SD/MMC slots and a QVGA 320x240 LCD panel with Resistive touch screen. In addition, the board supports Linux, WinCE and Android OS and offers plenty...... |
|
|
|
|
| NXP LPC1758 Starter Kit |
|
Order#: P75L
Delivery Wt:2.5 lb
IN STOCK
|
| This is the low cost development kit for NXP LPC1758 (100MHz, the very fast Cortex-M3 processor), including the LPC1758 evaluation board(P758) and Emlink for ARM(EAH1)JTAG adapter, so the developers can easy start to learn and test all the relevant applications on it, or evaluate your new project design through this entire system. |
|
|
|
|
|
Home 
