arm discussion forum thread list

Hi
just got 2 VSS3530 boards.

Trying to test video input using the supplied saMmapLoopback program.

I get ...

[root@OMAP3EVM /]# saMmapLoopback
tvp514x 3-005d: tvp5146m2 found at 0xba (OMAP I2C adapter)

Capture: Opened Channel
VIDIOC_G_INPUT: Invalid argument
Error in opening capture device for channel 0
[root@OMAP3EVM /]#

I am booting with the software that came flashed with the board. Can you suggest what
the problem might be?

I can"t find the source code for saMmapLoopback.

I notice the program is reporting a tvp5146m2 decoder chip. The decoder chip on the
VSS3530 is actually a tvp5150.

I am using an NTSC (not PAL) video source.
Please help.

Thanks
Steve

* Posted by: sgulick 2010-5-6 20:33:42 *

Re:VSS3530 saMmapLoopback fails <--- 〖Reply to this〗

Dear Sir,

What type camera interface you have ? BNC or S-video ?

* Posted by: James Li 2010-5-7 9:28:39 *

Re:VSS3530 saMmapLoopback fails <--- 〖Reply to this〗

I am using the BNC composite input connector on the VSS3530 and have an NTSC video
source connected.

thanks,
Steve

* Posted by: sgulick 2010-5-8 11:00:59 *

Re:Re:VSS3530 saMmapLoopback fails <--- 〖Reply to this〗

Dear steve,

Our camera module only support type of PAL.
Thanks.

* Posted by: James Li 2010-5-19 9:56:50 *

Report any problems to the webmaster.