Embest LPCEB2000 Evaluation Board
- A Complete Evaluation Kits for NXP Philips LPC2000 ARM7TDMI-S Core Microcontrollers
- Enable to Evaluate LPC2114/19/24/29/94, 2131/32/38, 2210/12/14/90/92/94
- Plenty of software examples, all in source code
Embest LPCEB2000 Evaluation Board(installed LPCEB2000-S module board)
The 16/32-bit LPC2000 family is based on a 1.8V ARM7TDMI-S core operating at up to 60 MHz together with a wide range of peripherals including multiple serial interfaces, 10-bit ADC and external bus options. These controllers are designed for use in a range of applications including industrial control, automotive, medical, connectivity and any other general purpose embedded application requiring high performance and low power consumption in a cost-effective package.
Embest LPCEB2000™ Evaluation Board Kit is a complete evaluation environment. It contains a development board, a JTAG debugger interface, and a suite of software tools for embedded development. Design, develop, implement and test your applications on LPC2000 from Philips using a single integrated toolkit.
Hardware specification
The Embest LPCEB2000 Evaluation Board is comprised a CPU module board and an expansion board. The expansion board named
LPCEB2000-I, include:
- Dimensions: 182 x 139 mm, Temperature: -45 to +85 Celsius
- Power input: +9V
- 2 serial ports
- 1 CAN port
- 1 reset button, 4x4 keyboard
- 8 indicator lights
- 2-channel AD sampling input
- 2-channel PWM output, one is output to a buzzer, the other is to PWMDAC
- I2C bus
- 8-digit 8-segment LED display
- Analog signal output to a speaker
- 20 PIN standard JTAG port
- Sockets for CPU module board expansion: one 10x2, one 20x2
The CPU module board is a LPC2000 core board, three types LPC2000 CPU module board exist now:
1) LPCEB2000-S CPU module board, solder LPC2129 as default, can be replaced with LPC2114/2119/ 2124/2194 directly.
2) LPCEB2000-A CPU module board, solder LPC2132 as default, can be replaced with LPC2131/2138 directly.
3) LPCEB2000-B CPU module board, solder LPC2292 as default, can be replaced with LPC2210/2212/ 2214/2290/2294 directly.
The CPU module board mount directly on top of the LPC2000-I expansion board via high quality goldplated pins and sockets. All the 3 types of CPU module board(LPCEB2000-S, LPCEB2000-A, LPCEB2000-B) can be installed on LPC2000-I. By this mode, customers can phototype LPC2114/19, 2124/29, 2194, 2131/32/38, 2210/12/14, 2290/92/94 on a same expansion baord with different CPU module board. You should select the type of CPU module board which you would like to install when you place an order.
Software Examples
Embest Provide plenty of software examples for this LPCEB2000 evaluation board, all in source code:
- LPC_source (initialize and start up software)
- beep_test (Buzzer test application, drived by GPIO)
- 8LED_test (8 segment LED display application)
- ADC_test (AD0 and AD1 test, show the value(mV) on 8 segment LED)
- SPI_test (Control 595 chip via SPI, light the 8 indicator lights )
- Time_test (Timer test application )
- Dog_test (Watch dog test software )
- I2C_test (I2C test software )
- EINT_test (external interupt test application )
- key_test (Key board test )
- PWM_test (PWM test software )
- PWMDAC_test (PWMDAC example software )
- RTC_test (RTC application example )
- UART_test (UART drive example )
- DA_test (DAC test software, only for installed with LPCEB2000-A CPU
module board)
Relative Documentation and Links
 Embest
LPCEB2000 Evaluation Board Kit Overview
Schematic
of LPCEB2000-I board
Schematic
of LPCEB2000-S board
Schematic
of LPCEB2000-A board
Schematic
of LPCEB2000-B board
 How to
download codes to LPC2000's on-chip flash via Jtag port?
Order Information
|
Home
